Controlled Onboarding · UK Homes · Battery + EV

Stop Octopus daytime EV charging from draining your home battery.

If Octopus starts charging your EV in the daytime, 1app stops the home battery draining into the car automatically.

~2 min

Typical setup

£0

No new hardware

4+

Devices, one dashboard

Now onboarding Solis and LuxPowerTek homes · Best fit reviewed before setup · Daikin access approval-pending

1app.energy dashboard showing live solar, battery, grid, and home data on mobile
Compatible devices

Works with the brands already in your home

1app connects to the hardware you already own — no new boxes, no rewiring. Controlled onboarding is focused on the devices and tariffs where home-energy conflicts show up most clearly.

Best fit today

You are on Octopus Go or Intelligent Go and daytime EV charging can clash with how you want to use your home battery.

You want to keep stored battery energy for later instead of quietly pushing it into the car.

You already have supported devices at home, with Solis, LuxPowerTek, MyEnergi/Zappi, Octopus, or another tariff setup we can review.

You want a safer cloud-based fix, not another daily routine of changing battery settings by hand.

Onboarding now
Solis logo
Solar Inverters & Battery
Onboarding now
LuxPowerTek logo
Solar Inverters & Battery
Onboarding now
MyEnergi logo
EV Charging
Onboarding now
Octopus Energy logo
Smart Tariffs
Approval pending
Daikin logo
Heat Pumps

Controlled onboarding is open for Octopus, MyEnergi/Zappi, Solis, LuxPowerTek and supported tariff setups. Daikin heat pump access remains approval-pending. More integrations follow as approvals and support coverage deepen.

From real installs

What homeowners say after wiring it all up

Carl Harvey's 1app.energy proof image showing dashboard, Solis and Fogstar batteries, and Zappi Glo charging
Everything is controlled flawlessly with full live visibility.

I am using 1app.energy to control two Fogstar batteries, a 6 kW Solis hybrid inverter and a myenergi Zappi Glo on the Octopus Go tariff. I'm using the Autopilot smart control which optimises battery charging, home coverage and grid export all based on my tariff and battery level. It would have been very hard to set up all of the separate parts to be anywhere near as efficient as this is.

CH
Carl Harvey
6 kW Solis hybrid · 2× Fogstar batteries · Zappi Glo · Octopus Go
6 kW Solis hybrid2× Fogstar batteriesZappi GloOctopus Go
Read Carl's story
Mike Fadden's 1app.energy proof image showing dashboard, Solis and Fogstar battery storage, and Zappi EV charging
A well-designed app that takes the effort out of managing a modern home energy system.

1app.energy is a clear, reliable app for managing my three-phase home energy setup in one place. I use it with a 15 kW Solis system, four Fogstar batteries and a three-phase Zappi to monitor electricity usage, battery behaviour and EV charging, with everything presented in a straightforward dashboard. The automated features are a real strength — including tariff optimisation and the ability to export surplus energy back to the grid automatically when the tariff and battery level make it worthwhile.

MF
Mike Fadden
Three-phase home · 15 kW Solis · 4× Fogstar batteries · Three-phase Zappi · Octopus Intelligent Go
15 kW Solis4× Fogstar batteriesThree-phase ZappiOctopus Intelligent Go
Read Mike's story
What you get

Set it up once. It runs from there.

No daily settings changes. No checking four separate apps. 1app watches your home energy system and acts when it matters.

Step 1

24/7 monitoring

Watches your battery, EV charger, and solar around the clock. You don't need to check anything.

Always on
Step 2

Automatic protection

When a daytime EV session conflicts with your battery, 1app steps in. No manual inverter changes.

Hands-free
Step 3

One dashboard

Solar, battery, EV, heat pump, and tariff rates in a single view. No more switching between four apps.

Unified
Encrypted credentials
Vendor-approved APIs only
Manual override always available
Built from real installs
Request onboarding review
Every setup is reviewed by hand before invite

We are onboarding compatible homes in controlled waves.

Join with just your email, or share more about your setup if you want a faster compatibility review. Solis, LuxPowerTek, Zappi/MyEnergi, Octopus, and other tariff setups are now being reviewed; Daikin heat pump access remains approval-pending.

Tell us about your solar or hybrid inverter to check compatibility. Other setup details are optional but help us prioritise your home.

Your setup details

Select your solar / hybrid inverter brand below (required), then add any other devices or tariffs you use.

Select your solar / hybrid inverter above to continue.Onboarding is open for Solis, LuxPowerTek, MyEnergi/Zappi, Octopus, and manual/non-Octopus tariff setups. Daikin heat pump access remains approval-pending.
Before you request access

Common questions before joining

Short answers to the things homeowners usually want to confirm before requesting an onboarding review.